全國統一熱線：15021182199
SKC旋風采樣器是一個輕量級的導電塑料單位持有的集合在一個可重復使用的磁帶在采樣濾波器。它是專為切割點在5µM 50%，速度為：1.9升/分鐘和4µm在2.2升/分鐘。
SKC旋風采樣器
旋風采樣器是專為粉塵（氣溶膠）抽樣呼吸公約中定義的標準en481:1993，使用14 / 3“HSE方法分為一般方法和重采樣，分析的吸入和可吸入塵“。
SKC旋風采樣器是高度推薦的獲得和讀取文件中的14／3，進行任何使用旋風采樣器在采樣。
設計流量為2.2升/分鐘，在4μm（微米）的顆粒大小，給出了一個50%的采樣效率（切點）
美國SKC的塑料旋風從導電塑料消耗周圍大氣制造的電荷，防止靜電干擾塵埃粒子的收集。
保持在一個可重復使用的塑料盒，這是提供完整的金屬過濾器支持
網格和密封夾，以防止樣品在運輸過程中的實驗室分析污染。
有關空氣取樣的詳細說明，特別是旋風采樣器的使用。
訂貨號：
| Description | Pack Size | Part Number |
| Cyclone cassette 25 mm for use with 225-69 | Each | 225-62 |
| Cyclone cassette 37 mm for use with 225-69-37 | Each | 225-62-37 |
| Rubber grit pots | 10 | 225-64 |
| Stainless steel grids without tab 25 mm for use with 225-69 | 10 | 225-66 |
| Stainless steel grids without tab 37 mm for use with 225-69-37 | 10 | 225-66-37 |
| Filter transport cassette 25 mm | Each | 225-67 |
| DPM plastic cyclone 37 mm | Each | 225-68 |
| Plastic cyclone with 25 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69 |
| Plastic cyclone with 37 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69-37 |
| O-rings for Plastic Cyclone (set of 3) | Each | P22569 |
| DPM cassette with 0.8 µm impactor | 10 | 225-317 |
| Without impactor, standard 3-piece clear styrene cassette loaded with 37 mm heat-treated quartz filter, support pad, banded, meets NIOSH 5040 specifications | 50 | 225-401 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 37 mm | Each | 225-100 |
| GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 25 mm | Each | 225-103 |
| GS-1 Single-inlet Cyclone includes bowl adapter, 37 mm cassette adapter, and grit pot | Each | 225-105 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 25 mm | Each | 225-101 |
| Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 37 mm | Each | 225-102 |
| Three-piece Filter Cassette Blanks 37 mm | 10 | 225-3LF |
| Three-piece Filter Cassette Blanks 25 mm | 50 | 225-3-25LF |
| Filter Cassette/Cyclone Holder includes: 3 feet of 1/4 inch ID Tygon tubing and a 25 mm adapter ring, for attaching a DPM or standard filter cassette to a worker's clothing in the breathing zone. May be used with or without a cyclone, required when using the GS-1 Cyclone with the DPM Cassette | Each | 225-1 |
| Replacement grit pots for use with GS1 and GS3 cyclones | 25 | P225012 |
| Standard-size Multi-purpose Calibration Jar | Each | 225-111 |
| 25 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones | Each | 225-01-01 |
| 37 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones. | Each | 225-01-02 |
| Calibration Chamber, for 25 and 37 mm cyclones | Each | 225-01-03 |
| Replacement Grit Pot for Aluminium Cyclones | 25 | P225011 |
打印當前頁
免費咨詢：15021182199
發郵件給我們：
金牌售前